FORM WORK FOR WALLS : COLUMN CLAMPS
Adjustable Column Clamps
Usable with steel or timber formwork Arms of all three sizes interchangeable
Size No. Min. & Max. distance between inside or opposite arms, cm
1 30.5 -- 73.0
2 44.0 -- 104.0
3 67.5 -- 133.0
Heavy duty Column Clamps with M. S. Channels instead of Flats also supplied for bigger column and Pump Concreting
 
 
Grid Decking System :
Staging for Flat Slab and Beam Slab using vertical support of Props or Scaffoldings of various types described in this literature ,with Drop +Heads on top in which Deck beams lock in to support slabforms provide advantage of removal of Deck Beams and slabforms in 3 to 5 days ,leaving support to slab in position, thus repeating it faster and reducing cost of Staging
 
   
FORM WORK FOR WALLS : COLUMN CLAMPS
Wallfrom Climbing Steel Shuttering  
Wallform system of steel shuttering comprises of standard panels manufactured out of 2.5 mm thick M. S. Sheets with slotted 45 x 45 X 5 mm angle/ M. S. Flat Frame and stiffner, channel or Heavy Duty Soldiers, and Tubes or Channels Walers. All these components are assembled together by four types of Clips of unique design. Soldires supplied in 2.5 M and panels in 1.25 M heights. For curved walls flexible panels are used instead of wallform panels. for single sided shuttering heavy duty soldiers used instead of channel soldiers and double loops used instead of wall ties
 
Formwork For Pours Higher Than 1.25 M: \ And With Pump Concrete
Consist of Panels, channel waling and Strongbacks behind them, spacings of which are designed to withstand desired pressures. We< provide design facility to our esteemed clients, for such design.
 
CUPLOCK'S & ACCESSORIES
  SB 1001     SB 1002
TOP CUP BOTTOM CUP
Malleable Casting, Sheet Metal, Natural Finish
Natural Finish For Pipe of 40.3mm OD
For Pipe of 48.3mm OD  
   
 
  SB 1003     SB 1004
LEDGER BLADE STANDARD
Drop Forged, Natural Finish Available in 1, 1.5, 2, 2.5, 3 mtrs.
For Pipe of 48.3mm OD  
Also available with hole  
   
 
CUPLOCK'S & ACCESSORIES
  SB 1005     SB 2001
LEDGER CUP NUT
Available in 0.8, 1, 1.2, 1.5, Malleable Casting, Natural Finish
2, 2.5 mtrs. Used on Rod of 32mm&
   
 
  SB 2002     SB 3001
JACK ROD with NUT
PROP SLEEVE
ROD - Mild STeel, 4 TPI Thread 32mm Made from PIPE of 60.3mm OD and thickness of 3, 3.5,
NUT - Malleable Casting 4mm with 4TPI threading.
  The surface finish is natural finish, electroplated
 
  SB 3002     SB 4001
PROP NUT with NECK TIE ROD
Malleable Casting Natural finish 'Vaishnav' thread of 2.5 TPI. Golden Electroplated 15/17mm
  Length upto 6 mtr. available. Breaking load of 135 KN.
   
 
  SB 4002     SB 5002
WING NUT SWIVEL COUPLER SHEETED
Malleable Casting with 'Vaishnav' thread of 2.5 TPI. (Light 48x48 - 3mm Sheet, Golden Electroplated)
Golden Electroplated 15/17mm  
 
Downlight Series ---previous page
 © Copyright Shee khodiyar Imperial . All Rights Reserved